LOW SIDE CONTAINERS FOR WASTE AND HEAVY MATERIALS TRANSPORTATION 
A small selection below of these multipurpose hook lift containers in action

Lowside Container
Six metre long container with 600mm high sides tipping sand. The double barn doors open right back and latch against the sides. The shaped side sheet adds strength and stiffness.


Lowside Container
A single door is shown on this 4.5 metre long container. 800mm high sides means a capacity of around 8 cubic metres.


Lowside Container
7 intermediate support posts in this six metre container go directly under the floor providing lots of floor support. Sign boards can be added to any container.


Lowside Container
This 20m3 container is equipped with a hydraulic door allowing the operator to remain in cab for faster and safer emptying. Viewing windows at the front improves the visibility during loading.


Lowside Container
The low front on this container allows the great visibility of the load.


Lowside Container
Tipping light wood chips here the Stronga 20 m3 container has been manufactured with only four intermediate posts and 3mm sides. The hydraulic door opens wide to allow heaped material to be unloaded without pinching under the door giving better heaping ability.


Lowside Container
Low sided container features closed channel stiffened chassis and box section under floor and side support posts.


Lowside Container
This Combi door is top hung but also opens as barn door and allows operator to easily drive plant into the container. An example for the useful options Stronga can offer.


Lowside Container
A 4.5 metre long container here with 600mm high sides gives six cubic metre capacity.


Lowside Container
This customer specified a top hung door was the requirement for this 22 m3 capacity container.